SL 8204230 QUAD 4 LED Soft White Opal Light Fixture for short cars NEW USA made

Description

SL 8204230
QUAD (4) LED Soft White Opal Light Fixtures for short cars DC/DCC w 2ea mounting Screws, 2 18in. Power Cables for short to medium length G Scale Cars - requires an SL LED controller
Ready to run;
pre-wired - ready to run with an optional SL LED controller
Shourt Line Product Number:
SL 8204230
Prewired ready to install
Buy it now price:
.99 New
An SL LED controller is required for operation
, use the SL 8452403 for battery operation or the SL 8453003 for AC,DC or DCC track power. When dimming is not required or space is a premium use the new SL 8352403 for battery operation or the new SL 8353003 for AC, DC or DCC track power. All SL LED controllers can operate dozens of lighting fixtures or over 200 LEDs at up to 94% efficiency,
6 times more efficient than any other product
.
Direct From Manufacturer-
Made in the USA
Ordering Notes:
Please let us know the following when ordering;
For LGB Roof interior installations use the 2 screws supplied to mount on the roof studs of the car.
For Non-LGB car installations use the FREE SL LGB Mounting Plate (request at time of order) that mounts in seconds to the roof of any car using the attached 3M adhesive pad.
The 4 LED lighting set installs in minutes with only a screw driver. (LGB track & car shown above not included)
Google
SL 8204230
for more product details and larger photos
Questions, contact us at the link above
Description:
The first of its kind prototypical interior lighting fixtures; no more circuit boards or self adhesive LED strips, you would not allow them on the ceiling of you home so why put them on your railroad, they do not distribute light properly, are ugly, inefficient and can damage your cars.
This new prototypical easy to use G-Scale lighting fixtures work on any long length car. The lamp shades feature a Tiffany style Opal white diffused reflector for soft warm white lighting. An SL LED controller is required for operation and are both the most efficient and lowest cost. They are available in roof, wall or under car mounting versions with optional anti-flicker, super capacitor and battery options for AC, DC, DCC or battery power operation.
The 4 LED fixture and SL LED controller is the only solution for up to 94% efficiency with any type of power. The high efficiency means no heat generation so no more melted roofs caused by by other products. As little as 8 ma of DCC track current is required to operate the 4 light fixture making this the
lowest power lighting
available today, no other product is even close to the efficiency. On analog power you lighting will be full on at slow loco speeds (track power) and efficiency is still up to 94%, the best in the industry. The next closest product is less than 20% efficient at full track voltage.
In addition to the 4 LED Tiffany style Opal fixture shown here we offer 8, 12 and 14 LED versions for long cars as well as 4, 6 and 8 LED versions for short and med length cars. Versions for loco cabs, work cars and all style and size cabooses are also available, you can even be your own lighting director using the single 1 LED Opal lamp fixtures with 3M adhesive pads for instantly adding light wherever you desire. Adding additional Opal lamp fixtures to a car creates soft and realistic lighting and does NOT increase the power requirements it only makes lighting more distributed and prototypical.
Advantages
:
Prototypical Lighting
Pre-wired for any long G Scale car (non-LGB cars use our optional mounting plate for any roof)
Best Lighting solution for any type of power; analog (DC), AC, DCC or Battery with an SL LED Controller
Lowest power,
with an SL LED Controller
8 ma at 22 volts, the lowest current of any product available.
Highest output
at slow loco speeds and full brightness with no track power when SL buffers used..
Up to 94%
efficien
t, highest efficiency
of any product available
with an SL LED Controller
.
The reason why using the SL LED lighting with controller draws the least current of any other product is that White LEDs operate at about 3 volts DC and if your track voltage is 18 volts, the 15 volt difference in voltage is wasted as heat by all other products, period.
At 18 volts input voltage all other systems at at BEST 3/18ths or 16% efficient where ours is up to 94%
Over 6X more efficient that any other product
Life time warranty
when used with SL LED controllers (return to dealer or Shourt Line for repair or replacement)
Prototypical Appearance
The only interior lamp fixtures based on real fixtures and no visible circuit boards, electronic parts, sockets or wiring (with the exception of input and output SL power micro cables
Work with any style roof from any manufacturer
Pre-wired ready to use in minutes
Prototypical power cables
Warm white flat LEDs match the color temperature of your locos lighting.
LEDs are mounted in Tiffany style opal white lamp shades that produce
soft diffused prototypical lighting
Easy and fast mounting in minutes
Easy hookup
Works with any track power AC, DC (analog) or DCC or battery power with an SL LED controller
Works with any voltage: 3-30 Volts when used with an SL LED controller
Hidden wiring
Low cost
Specifications:
Soft Lighting
provided by Tiffany style opal white lamp shades
Warm white flat top wide angle LEDs are enhanced diffused and create a soft lighting with the Opal shades
High output LEDs for maximum light
Maximum current per LED 23 milliamps (.023 amps)
Operating Voltage 3.1 Volts DC (SL LED regulator required for operation)
Fixture size: designed for LGB short to med length cars
Opal Lamp Shade Dimensions: 28mm dia. x 8mm high
Power wires: 2 each two conductor micro power cables 460mm(18") long X 24 AWG
2 stainless steel mounting screws for LGB roof mounting
Free mounting adapter for cars without LGB mounting studs (just ask for it when ordering)
Optional SL LED controller required for operation
Made in the USA by the Shourt Line
Mounting Instructions:
4 Light fixture (for seating or general car area illumination):
LGB short to med length cars:
Use the two supplied mounting screws to attach of the 4 lamp fixture to the roof mounting studs located on the inside of the car roof. Use the free SL LGB mounting plate (request one when ordering) with 3M high temperature self adhesive pad that mount on any roof interior without center of car mounting posts.
Non-LGB cars:
For cars without LGB style mounting studs use the free SL LGB mounting Plate
(request one when ordering)
. Screw the 4 light fixtures to the SL Mounting Plate, peel off red cover of the 3M pad and apply to a clean surface on at the desired location. The lighting fixture can be removed if desired, by removing the mounting screws.
Optional end of car porch Light fixtures are available separately (free wiring when ordered with a fixture)
LGB or Non-LGB cars:
Solder the long stripped wire to any LED wire connected to a red wire (positive), solder the short stripped wire to any LED wire connected to a green wire (negative). Clean the roof where you want to mount the light with an alcohol wipe, peel off the red backing and position as desired.
Optional exterior coach lamp LEDs are available separately
(free wiring when ordered with a fixture)
:
LGB or Non-LGB cars:
Solder the long stripped wire to any LED wire connected to a red wire (positive), solder the short stripped wire to any LED wire connected to a green wire (negative).
Snap the LED mounting into a coach lamp and route wires as desired.
Hook-up Instructions:
Powering the 4 LED fixture:
Route one of the pre-wired 18 inch LED power leads from the light fixture to a roof, wall or under car mounted SL LED Regulator or run to a car that already has power from an SL LED controller. To route power coming from the bottom of the car place one of the fixture power cables into a hole in your car.
When routing power from another car or loco at coupler height or when using an under car SL LED controller route one of the fixture power cables through a hole in the bottom of the car.
When using an under car SL LED controller, connect the wires to the Output of an SL LED controller as shown above, be sure to connect the smooth cable to the + output and the cable with ridges to the - (negative) output.
Always
test your SL LED controller
BEFORE
installing by following the SL LED controller directions.
Connect the power input terminals to either a SL Power pickup kit or SL BB Wheel short connector kit (see above) or use the 18 inch cable that comes with all under car SL LED controllers.
Secure the under car SL LED controller (with your choice of 2 second anti-flicker[shown above] or 1,2,4 or 10 minute run w/o power buffer) with the two stainless steel screws provided. Note that LGB cars have mounting holes on all short and mid length cars for mounting.
Connect to your choice of power:
Ball Bearing Wheels
and
SL 4128516
Short Power Connector Cable (shown above)
PIKO 36167
Ball Bearing Power Pickup wheel sets - no connector supplied
LGB 67403
Ball Bearing Power Pickup wheel sets - solder terminals provided
Metal Wheels
and
SL Power Pickup kit
LGB metal spoke or solid wheels and
SL 6011602
Power Pickup Set for LGB or PIKO Metal Wheels
PIKO plated solid metal wheels and
SL 6011602
Power Pickup Set for PIKO Metal Wheels
Loco power jack using either:
SL 4128210
LGB round mini-banana power connector kit: 2 plugs, 2 sockets red & black
SL 4128310
LGB square 2 pin power connector kit: 1 socket (F) with 8" wire, 1 plug (M)
Car with track power
Contact us for connector options
For powering from a loco or another car:
Route one of the LED power cables to the next car that has LED power using a
Shourt Line
SL 4128210
LGB round mini-banana power connector kit
. For LGB square style power connectors use a
Shourt Line
SL 4128310
LGB square 2 pin power connector kit
.
SL
4128410
LED connectors
can also be used for either LED voltage or track/battery voltage distribution.
For powering from lighting boards in additional cars:
Use
SL
4128410
LED connectors
for car to car LED power
Two 18" micro power cables provided can be used to connect to cars on each side by stringing the cars from roof to roof or by connecting at the coupler level for a brake hose appearance. Please contact the Shourt Line for help in selecting best lighting solution for your cars and type of train control and track voltage.
Options:
(see our store for details)
Optional Lighting fixtures:
Single Opal lamp fixtures area available to use anywhere you want to add lighting. The wire in parallel with any of the LEDs of the 4 LED fixture. The long stripped wire is positive and connects to the red wire connected LED leads. The short stripped wire is negative and connects to the green wire connected LED leads. Here are suggestions for adding fixtures:
Use one (1) each optional SL 1 LED fixtures with a flat mounting plate & 3M pad to attach over the outside door.
Use two (2) each optional
SL 1 LED fixtures with a sloped mounting plate & 3M pad
to attach over
either side of the entrance door to illuminate the steps to the car platform.
Track Power Pickup Options:
For
LGB
or other makes of short to mid length cars use one of our
SL Opal lamp fixture for short cars
with one of these options or the ball bearing power pickup wheel sets shown above:
SL 6011604
low drag Power Pickup Set with
LGB
spoke or solid metal wheels
Use the
SL 6011604
low drag Power Pickup Set with LGB spoke or solid metal wheels on short car 1 axle trucks.
SL 6011602
ultra low drag Power Pickup Set with
PIKO
chrome plated wheels
Use the
Shourt Line
SL 6011602
pre-wired cable connector set with
PIKO 36167
wheel sets on LGB
1 axle trucks
For any make or model long or short cars use this option:
SL 4128510
pre-wired or the
SL 4128410
cable 4 connector set with
PIKO 36167
or
LGB 67403
Ball Bearing Power Pickup wheel sets
Use the
Shourt Line
SL 4128510
long pre-wired cable connector set (shown above) or the
SL 4128516
Short p
re-wired p
ower
c
able connector
with the
PIKO 36167
or
LGB 67403
Ball Bearing Power Pickup wheel sets with any make of G scale cars.
SL 4128410
4 each Phosphor Bronze plated 1 amp connectors and heat shrink tubing do it yourself kit for
with the
PIKO 36167
or
LGB 67403
Ball Bearing Power Pickup wheel sets
.
For LGB long cars use this option:
SL 9108230
ultra low drag Power Pickup Set with
PIKO 36164
Plated Metal Wheels
Use the
SL 9108230
ultra low drag power pickup kit with
PIKO 36164
Plated Metal Wheels on LGB long car 2 axle car trucks (not included with item).
Power buffer Options:
For anti-flicker use the following
(note that the size of the capacitor is dependent on the number of LEDs you have)
SL 6111100
10,000uF Anti-flicker Buffer
SL 6111068
6,800uF Anti-flicker Buffer
SL 6111047
4,700uF Anti-flicker Buffer
For running lights when power is lost use the following:
SL 6102104
2.5 Farad Gold Cap 10.8 Volt buffer for over 6 minutes of lighting without track power
SL 6132104
2.5 Farad Gold Cap 10.8 DC-DC converter buffer for over 6 minutes of lighting without track power
Battery Power buffer with built in SL LED Regulator in a weather proof case for under or inside car placement:
For over 10 hours of
full lighting
with live steam, battery or analog trains when stopped at slow speed, use the following:
SL 68193104
SL-XLSUPS
Shourt Line Extreme Lighting Uninterruptible Power Source for short cars (shown below)
SL 88193104
SL-XLLUPS
Shourt Line Extreme Lighting Uninterruptible Power Source for long cars
Both provide:
Small size: 3.3 x 1.6 x 0.8 inch case size
Mounts with the mounting holes on all LGB short cars (model
SL 68193104
)
Under or inside car mounting on any long or short length car
An enclosed weather proof (waterproof optional) case with stainless steel mounting screws
Screw Terminals for easy install in minutes
High energy UPS 10Ahr 3.7V rechargeable li-ion battery
SL- LED controller/dimmer
SL-Li-IonChg Li-ion auto charger for any type track power over 8 volts or use the built in USB 5 volt charger port
Power this SL 4 LED fixture for over 4 hours!
Power 80 LEDs for over 12 minutes without any power!
Long life Li-ion battery with low discharge rate while off
ON-OFF light switch.
Short Circuit Protected
Reverse Polarity Protected
USB changing port (5 volts)
Automatically uses track power over 6.5 volts and not battery power
Perfect for live steam, battery, analog powered trains at no or low track voltage or displays where power is not available or intermittently available such as train barns with powered sections of track. A battery charge circuit is built in for automatically charging from DCC, AC or DC track power over 8 volts or any 5 volt source using the built in USB port for charging.
The ultimate UPS for train lighting hidden in plane sight under your car! Light up your whole train 100 LEDs for up to 10 hours without any track power!
SL 68193104
SL-XLUPS
Shourt Line Extreme Lighting Uninterruptible Power Source for short cars (shown above)
LED Controller Options (At least one per train is REQUIRED for safe LED operation)
An SL LED controller is required with this LED fixture. The SL controller both regulates and dims over 200 LEDs at up to 94% efficiency and at 3 to 35 volts
SL 8452403
LED controller for battery power or DC power source
Use the
SL 8452403
LED controller for battery power (not included with item)
SL 8453003
LED controller for powering from AC, DC or DCC track power
Use the
SL 8453003
LED controller for powering from AC, DC or DCC track power (not included with item)
Shown above on the left inside wall is an
SL 7453003
3 Side Snap On Cover (not included with set) that hides an SL LED controller while providing access to its brightness and dimming adjustment screw. Under the cover is an optional
SL 8453003
LED controller/dimmer (not included with set) for powering up to 300 leds from AC, DC, DCC or battery power.
The lighting is easily adjusted using the dimmer built into the SL LED controller shown above.
One
SL 8453003
LED controller can power and dim dozens of lighting boards or Opal Lamp fixtures, add an SL buffer for anti flicker or powering up to 3 minutes without any track power (
SL 6132104
shown), add one PIKO ball bearing pickup or the SL low drag power pickup set to connect to track power. Items shown above are not included with the lighting board but are available at our store.
Power buffer Options:
SL-8103104
2.5F11V sCap Buffer with LED controller in under car mount for long cars
Provides both over 3 minutes of car lighting without track power and LED controller under the car in a water proof box for invisible buffering and LED control, Optionally available for analog users is a porch light controller so the lights on the outside of the car over the steps come on only when the train stops so passengers do not loose their footing. This optional feature adds interesting lighting automation to the railroad not otherwise available..
SL-8102014
.25F11V miniCap Buffer with case for inside roof mounting
Analog train operators can add the
SL 6132104
2.5 Farad 10.8 Volt low cost high efficiency Gold Cap buffer for over 6 minutes of lighting without track power with the 4 LED drop ceiling fixture. 2 drop ceilings (8 LEDs) last over 3 minutes, 4 drop ceilings (16 LEDs) will run for over 90 seconds. The the
SL 6132104
super capacitors are on wire so they can be invisibly placed under the car seating and the controller fits easily on the the inside wall of any passenger car.
(not included with item)
DCC Decoder Control Options:
ESU Lokpilot 4.0 function decoder for MTS/DCC remote on/off and digital dimming + 7 extra functions or lighting control functions
DCC users can set the porch lights to come on when the train in stopped in a forward direction for automated platform illumination
Toilet lights and interior lighting can also be dimmed individually and toilet lights can be set to come on and off automatically.
Photos:
Each fixture comes with two stainless steel mounting screws and a free mounting plate (when requested at time of ordering) for mounting on cars without LGB type mounting studs. Also included are two 18 inch long black twin micro cables for wiring.
The large opal white lamps provides even illumination and all circuit components, electrical parts and wires are hidden inside the fixture for a prototypical appearance. and keeps wires in the wire channel of the roof for easy roof removal and replacement. The fixture hides wires that can be routed down the inside walls of your car for wheel power pickup and/or run from car.
Additional LEDs can be added to the fixture at any time by wiring in parallel to the existing LEDs. The long positive lead is wired to the the leg of an LED connected to a RED positive wire. The short LED leg is wired to leg of an LED wired to a green negative wire. Each SL LED controller can operate up to 300 LEDs in parallel so add LEDS wherever you desire.
The micro power cable included with the boards makes a super clean and prototypical appearance as shown above.
(
train not included with item
)
White latex paint can be added to the back side of LEDs when mounted on a roof without sky lights. For roofs with a copula windows (sky lights) no white reflective paint is added so that LEDs can illuminate BOTH down into the inside of the car AND up into the copula and its windows for a prototypical appearance as shown in photos.
(
train not included with item
)
For indoor or outdoor use. Note the SL LED regulator mounted to the bottom of the car above that can power up to 300 LEDs or over 70each 4LED fixtures.
Don't leave your passengers in the dark!
(
train car and figures not included with item
)
Google
SL 8204230
for more product details and larger photos
Questions, contact us at the link above
Thanks for looking - Shourt Line by Soft Works Ltd.
copyright 2019 ShourtLine.com - Soft Works Ltd. all rights reserved